Xerox Workcentre 6015 N

The Xerox WorkCentre 6015N is identical to the WorkCentre 6015 NI : a colour laser all-in-one printer designed for companies with monthly print volumes falling between 1500 and 30,000 pages. This model is one of the smaller printers in the Xerox range. It comes in several versions. The 6015 N comes with USB, Ethernet and wi-fi connectivity and it also has standard IPv6 security. Its 128 MB memory means it can be shared comfortably by a group of twenty people.


Hardware: the only difference with the WorkCentre 6015 NI is that there’s no wi-fi here. Otherwise everything is identical.

Speed: Although lasers are known for being particularly fast (especially in comparison to inkjets), this model drags its feet a bit. 16 pages per minute (ppm) black & white and 12 ppm colour is some way behind the 30 ppm you get on the Brother MFC-9970CDW for example.

Quality: The colour prints are precise, sharp and accurate. Lines are reproduced down to the smallest detail and legibility of our test document is perfect. The deltaE 94 reading however shows colour accuracy to be rather relative with a tendency towards yellow.

Cost per page: Only one cartridge size is available: standard. You’ll get less pages out of these cartridges than their Epson or Brother equivalents. Moreover the starter cartridges are only half full and will only give 500 pages. Why so stingy?

Check out the review of the WorkCentre 6015 NI for a full breakdown of these results.