FranceBelgiqueUSAUK
Product Survey: Headphones >
Shure SE210
Réponse en fréquence 25 Hz - 18,5 KHz
Haut parleur Hi-Definition MicroSpeaker
Impédance 26 Ohms
Sound Pressure Limit Non communiquée
Longueur cordon 45 cm (de l'oreillette au connecteur)
et rallonge de 91 cm
Type de casque Intra-auriculaire
Know how to wear your earphones
In-ear headphones aren’t worn like simple headphones. With Shure, part of the user’s manual is devoted to the perfect insertion of each speaker into the ear. To do this, start by kneading each foamed end in order that it becomes compact. The aim is to insert them into the ears like earplugs. Determine the right from the left, and while keeping the foam compressed, run the cable behind the ear and let it fall towards the audio source. Insert the earphone in the ear and allow it take its original volume. Once in place, it should give an impression of sound isolation. A good test is to rub the index and thumb together next to the ear, something you should barely be heard if the earphone is well in place.
Vincent Lheur
Updated: 2007-10-04 - Test date: 2007-06-14
Here is the entry level from Shure’s latest generation of intra-ear headphones.  On that account, the SE210 uses the same audio drivers as higher end models (SE310, SE 420 and SE530),  however «the same type » doesn’t mean « the same number »!  The SE210 only has a single and unique driver, which is in charge of reproducing the entire combination of frequencies that reach each earphone.  Highs, mediums, basses – all go through the single mini-speaker.  Consequently, sound slightly lacks basses and we can’t always distinguish more subtle nuances.  But for those who have never invested in a quality headset, they will not be disappointed.

The SE210 actually does quite well in tests.  Even if might naturally shy away from this entry level product from Shure, this model is a success with fine quality sound which largely surpasses the standard equipment of MP3 players. Apart from a few notable exceptions, most walkmen are actually sold with rather poor quality headphones.   Even the best in this category are no match for the SE210.

To provide this impressive result, Shure improved its system of classic audio drivers.  Earlier models were composed of a sort of vibrating membrane producing air pressure and therefore an audible frequency.  The only problem is that the frequencies produced in this manner result in a sinusoidal wave where the tips are somewhat pointed and more triangular.  To give frequencies a more rounded and harmonious form, Shure had the idea of moving the driver from the front to the back while it oscillates.   Indeed, the result is very convincing.

- Sound isolation

- Sleeves of different sizes

- Good quality sound

- Light weight

The entry-level from Shure, these are necessary if you simply want to exchange your MP3 player’s mediocre standard earphones for truly higher performance.
Send to a friend
Return to the Introduction : Product Survey: Headphones

Our RSS News Feeds :